jims pram build...

[JetBoat Jim]

Well I decided to build another smaller boat for now, but this one will have very few extras in the boat. I want to see how light I can make a 8 foot x 42 inch pram, it will still have some nice finishes.

after this one I will be starting on a cedar strip boat ,but for now I need a beater to put around in.

I'll try to explain every step as I go ,so you will be able to do this at home....trust me its easy.

Most of you will rember the last build , I was very happy with the way the hull turned out. I figured the easiest way to copy it was to lay a piece of poly over the other boat and trace with a felt pen....




after I had it all taped in place I marked out oar locations....this will be ok for a 200 lber like me.



getting ready to chop her out....





more to come .....stay tuned.

[RickB]

Very nice Jim, can't wait to see the rest! What would it cost in materials to build one of these?

[GOFISH]

I was thinking and wondering the same thing .....

[marko]

I wouldn't think it would be much more than $100 beans if you already have the oars.

Marko

[JetBoat Jim]

the last boat cost me about 350-400 $ ...the most expensive part is the epoxy, and fiberglass resin.

the 350-400$ was including the 9 foot clear oak 2 inch by 4 inch planks used for the trims...

this boat will be getting less storage inside....so it will be lighter and cheaper.

the last one I built.

[marko]

Wow nice tub ...!

[Big Green Machine]

That's a sweet ride. Ever sell one of them puppies Jim?

[brian86]

Wow. Is there a link to a build thread for the last one?

[RickB]

Wow. Is there a link to a build thread for the last one?

Thats what Jim is doing here, be patcient!

[TheDon]

This is awesome! I've been considering doing a project like this for a couple years now just haven't worked up the courage. I have a couple partial plans so far but nothing professional. I'll be watching to give me a little encouragement. What type of plywood are you using? Marine grade?