BC Fishing Reports banner
1 - 1 of 1 Posts

· Registered
29 Posts
I would strap a 2x6 across the gunnels and mount the rigger pointing off the side.
You can mount rod holders on it as well.
Should be D rings on the boat to secure the 2x6.
Dress up the 2x6 using a router to make a nice edge all the way around, lightly burn it with a torch, rub off the excess soot, then varathane it.
Then your off. :beerchug:
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.